Compatible Brand: iPhone
Packaging: no package
Material: Metal Alloy
New and original Parts for iPhone 4 vibrator replacement
Compatible: for iPhone 4
Package Include: 1x Vibrator Motor replacement
This is original Parts for iPhone 4, it is used to replace the damaged Vibrator.
Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws. Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.
Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.
Push the rear panel toward the top edge of the iPhone.
Pinch the rear panel with your fingers and lift it away from the iPhone. Alternatively, use a small suction cup.
Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
Use the clear plastic pull tab to gently lift the battery out of the iPhone.
Remove the following two screws securing the vibrator to the inner frame: 6mm, 1.4mm.
Remove the vibrator from the inner case
1. We 100% test all Screens and other Repair Parts before shipping. We ensure all our screens are good quality and work perfectly!
2. Please test all LCD Screens after package reach you. If there are any defects, please contact us for exchange. We exchange for all no-installed screens.
3. We don`t exchange for installed screen. Please never install any screens before testing them. Wrong operation always causes damage to LCD screens.
4. Please ship defective LCD back to us. After get it, we will reship it immediately. Customers pay return cost, we pay reship cost.
5. Please pack the LCD well, If the return LCD is scratched or crashed because of bad packing, we will refuse exchange.
6. All our products have 1 year warranty before installation. If you not satisfy with the quality, you can return the product and ask refund in 12 months.